Sony LBT-ZUX9 - Manual (Page 33)

33 US
Ta
p
e
Playing a tape
You can use TYPE I (normal) tape.
1
Select a tape deck.
Press TAPE A/B (or FUNCTION on
the remote) repeatedly to select
“TAPE A” or “TAPE B”.
2
Load a tape.
Press A Z PUSH OPEN/CLOSE or
B PUSH Z OPEN/CLOSE on the unit
to open Deck A or Deck B.
Push A Z PUSH OPEN/CLOSE or
B PUSH Z OPEN/CLOSE again to
close the selected deck.
3
Press NX (or N on the
remote).
The tape starts playing.
4
Turn MASTER VOLUME
(or press VOLUME +/– on the
remote) to adjust the volume.
Other operations
Note
During playback, rewind or fast forward
operation, you cannot open the tape deck.
Tip
If you press NX (or N on the remote) when
the TAPE A function is selected and there is no
tape in Deck A, the system automatically
switches to the TAPE B function when there is
a tape in Deck B and vice versa. Then, playback
will start.
Tape
Load a tape
into the deck
with the side
you want to
play back or
record facing
upward.
To Do this
Stop playback Press x.
Pause playback Press NX (or X on the
remote). Press NX (or
X on the remote) again.
Fast forward or
rewind Press m or M. To
return to normal playback,
press NX (or N on the
remote).
Remove a tape Push A Z PUSH OPEN/
CLOSE or B PUSH Z
OPEN/CLOSE on the unit
when playback is stopped.