Sony LBT-ZUX9 - Manual (Page 43)

43 US
Oth
e
r Op
eratio
ns
Using the timer
— Sleep Timer
You can set the system to turn off after a
certain time, so that you can fall asleep to
music.
Press SLEEP on the remote
repeatedly.
The minute display (turn-off time)
changes.
If you select “AUTO”, the system
automatically turns off after the playback
of the disc, tape or USB stops or in 100
minutes.
Do not select “AUTO” during CD-TAPE
or CD-USB Synchro Recording.
To cancel the Sleep Timer, press SLEEP
repeatedly until “SLEEP OFF” appears in
the display.
Tip
To check the remaining time, press SLEEP on
the remote once. However, you cannot check
the remaining time if you select “AUTO”.
— Play Timer/Recording Timer
You cannot activate both the Play Timer
and the Recording Timer at the same
time. Make sure you have set the clock.
Use the buttons on the remote for the
operation.
Play Timer:
You can wake up to music from disc, tape,
tuner or optional USB device at a preset
time.
Recording Timer:
You can record from a preset radio station
at a specified time.
1
Prepare the audio source.
For Play Timer:
Prepare the audio source and then
press VOLUME +/– to adjust the
volume.
To start from a specific track, create
your own program (page 22).
To wake up to a tape, load a tape into
Deck A.
For Recording Timer:
Tune in the preset radio station you
want (page 31).
2
Press CLOCK/TIMER SET.
3
Press . or > repeatedly to
select “PLAY SET?” or “REC
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start playback or
recording.
Press . or > repeatedly to set
the hour, then press ENTER.
The minute indication flashes in the
display. Use the procedure above to set
the minute. “OFF” appears and the
hour indication flashes in the display.
5
Set the time to stop playback or
recording using the same
procedure as step 4.
6
Select the audio source or
prepare the recordable tape.
Other Operations
Falling asleep to music
Setting the timer
Continued l