Sanyo POA-CH-EX06 - Manual (Page 6)

5
Installation Procedure
Attach the setting plate to the wall plate
1
Hang the setting plate hook onto the wall plate slits.
2
Tighten the four M8 x 20 mm hexagon socket head cap bolts supplied
with the setting plate. (Secure temporarily so that the adjustment men-
tioned on page 7 can be carried out.)
3
Attach the left and right cover plates to the setting plate using the two
M5 x 10 mm hexagon socket head cap bolts included. (Secure temporar-
ily so that the adjustment mentioned on page 7 can be carried out.)
Wall plate
Setting plate
Bolts
Bolts
Bolts