Sanyo POA-CH-EX06 - Manual (Page 7)

6
English
Installation Procedure
Securing the projector to the setting plate
1
Attach the adjustment unit to the
projector using the included 5
screws (M4 x 18).
Adjustment unit
Projector
Screws
2
Remove the two bolts (for drop-prevention)
from the setting plate. Loosen the four
bolts located on the top of the adjustment
unit and set the projector with the adjust-
ment unit onto the setting plate.
Setting plate
Loosen bolts
Projector with the adjustment unit
Bolts
3
Tighten the four bolts which were loosened to secure the projector to
the setting plate. Attach the two bolts (for drop-prevention) to the setting
plate.
Bolts