Sunfire OLE-2SF - Manual (Page 11)

Rough-In
Roughing-in the Olé-SF requires
careful attention to the design plan
made previously. Review the previ-
ous page and make a list of things
to factor in to specific mounting loca-
tions, before deciding exactly where
to place the unit. In order to avoid
Electro-Magnetic Interference (EMI),
do not mount touchpads close to
light dimmers. Leave at least one
stud-bay open between touchpads
and dimmers (leave more space if
multiple dimmers are present). Avoid
installing Olé-SF touchpads in ar-
eas that will receive direct sunlight.
Sunlight can flood the IR receiver
and make the system inoperative.
Do not mount touchpads outdoors!
Corrosion will damage them. Sunfire
does not warrant Olé touchpads for
outdoor use.
Mounting Height
The Olé-SF has no viewing
angle limitations, so mounting
height should be determined by the
average height of the user. Typical
mounting height is 6-60 inches
from the floor to the bottom of the
frame. This will provide optimum
viewing for the largest number of
people.
11