Sunfire OLE-2SF - Manual (Page 6)

Installation & Usage Tips
• When properly installed, nothing
should be applying contact pres-
sure to the touchpad except for
the operator’s finger. If something
is touching the touchscreen
window, a false signal can be
generated causing the touchpad
not to respond to a finger press
(Sunfire does not recommend
wrapping the removable frame
with wallpaper as this can cause
the aforementioned symptom).
Too much force on the front of the
touchpad, or concentrated pres-
sure, can damage the polyester
film or break the underlying glass
plate.
• Avoid installation in direct sunlight
or strong ultraviolet light (such
as grow lamps, plant lights, or
compact fluorescent lights). This
can degrade and discolor the
polyester film.
• Avoid installation over heat
generating devices and/or in moist
areas where condensation can
form on the polyester film. Both
heat and condensed moisture can
affect touch screen performance.
• Avoid installation next to thermo-
stats. The touch screen generates
heat that can affect thermostat
control and readings.
• Avoid applying any foreign ob-
jects, such as adhesive labels, on
the touchscreens polyester film.
This can release chemicals that
can discolor the clear film.
• The touchpad should not be
mounted near electronics that
emit radio frequencies or elec-
tromagnetic interference (such
as the deflection circuits of CRT
monitors, light dimmers, and some
power supplies)
• The edge of the touchpad has
exposed sharp glass. Be careful
when handling the assembly in
order to avoid injury.
Cleaning the touch screen
To clean the polyester film, first
use a soft dry cloth to remove
contamination. If dust or smudges
are still present, disconnect the
touchpad, and use a damp cloth
that has been squeezed of excess
water to remove the contaminant. If
contaminants are still present, use
a non-abrasive cleaner or detergent
to clean the polyester film. Use
of strong chemicals and/or some
cleaning agents may discolor the
polyester film. The following cleans-
ers have been tested and approved
for cleaning an Olé-SF touchpad:
• Windex® Glass Cleaner
• Formula 409® Cleaner
• Mr. Clean®
6