Sharp AR-337 - Manual (Page 104)

6-2
CHAPTER
6
PART NAMES AND FUNCTIONS
Exterior
Exit area cover
Open to remove misfed paper.
Power switch
Press to turn copier power on and off.
Exit tray (optional)
Finished copies are deposited in the exit tray.
Operation panel
All copier controls are located here for easy
operation.
Document feeder indicators
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Indicates an original is still on the document glass.
RADF feeding roller cover
Open to remove misfed originals.
Original guides
Adjust to the size of the originals.
Document feeder tray
Holds up to 50 originals.
RADF exit area
Finished originals are output here.
RADF exit roller cover
Open to remove misfed originals.
Paper trays
Each tray holds 500 sheets of 20 lb. bond paper.
Front cover
Open to remove misfeeds and to service the
copier.
Handles
Right side cover
Open to remove misfeeds in the paper feed area.
Toner collecting container cover
Open to replace the toner collecting container.
Document glass
All originals which cannot be copied from the
RADF must be copied here.
Paper clip tray
Keep paper clips here.
GENERAL INFORMATION Part names and functions