Sony STR-DG1000 - Manual (Page 81)

81 GB
T
u
n
e
r O
p
era
tions
Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
4
Press ENTER.
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Presetting radio stations
You can preset up to 30 FM and 30 AM
stations. Then you can easily tune in the
stations you often listen to.
1
Press TUNER repeatedly to
select the FM or AM band.
2
Tune in the station that you
want to preset using Automatic
Tuning (page 80) or Direct
Tuning (page 81).
Switch the FM reception mode, if
necessary (page 80).
Direct tuning
1
3
2 4
Presetting radio stations
1
3,5
4
continued