Sunbeam JE4700 - Manual (Page 4)

4
Assembling your Sunbeam Pure Juice.
Before Use:
After unpacking your Pure Juice, we
recommend that you dissemble the unit
before using for the first time. Wash all
parts except the Motor Base in hot soapy
water. Rinse and dry immediately.
Important:
Always ensure your Pure Juice is
unplugged from the power outlet when
not in use, assembling or removing
parts.
To assemble your Pure Juice
(See opposite)
1. Set up the Motor Base on a dry level
surface with the On/Off switch facing
the user.
2. Place the Juice Collector onto the
Motor Base.
3. Position the stainless steel grating and
filtering basket on to the drive shaft.
4. Place the Lid/Feed Tube on top of the
Pure Juice and secure by clipping the
two safety levers on the sides of the
juicer into position.
Note: As an added safety feature
the Pure Juice will not operate if the
safety levers are not locked in place.
5. Position the Pulp container in place.
6. Plug the Pure Juice into the 230-240V
power outlet and turn on Power.
Position a glass or jug under the Juice
outlet and commence juicing.
Food Pusher
Lid/Feed Tube
Stainless steel
grating and
filtering basket
Safety Lever
Drive Shaft
Motor Base
Continuous Flow
Pulp Container
On/Off Control
Button
Juice
Collector / Outlet