Care and cleaning – Sunbeam JE4700 User Manual
Page 6
Ensure that the Pure Juice is unplugged before
cleaning.
After use, unplug cord and disassemble the Pure
Juice. Remove the pulp from the Pulp collecting
container (the pulp may be used in recipes, see
recipe section). The Pure Juice parts should be
rinsed in cold water then washed in warm water
with a mild detergent. Rinse well. Use a soft,
damp cloth to wipe the Motor Base.
Important: Never immerse the Motor Base in
water or any other liquid.
Caution: Cutting teeth are very sharp, handle
juicing filtering basket with care when
removing, replacing and cleaning.
Remove pulp from the grating and filtering
basket before washing. The basket can be
brushed with a nylon washing brush or clean
tooth brush to remove fine particles of pulp that
may be caught in the fine holes of the filter.
After processing highly coloured fruits or
vegetables the Pulp Collection Container may
become stained. Bicarbonate of Soda sprinkled
into the dry Container, and rubbed with a damp
cloth to help remove stains.
Caution: Never use steelwool, scouring pads,
harsh abrasive cleaners, thinners or chemical
dust cloths for cleaning.
Care and Cleaning.
6
Sunbeam is a registered trademark. Pure Juice is a
trademark of the Sunbeam Corporation. Made in China.
Due to minor changes in design or otherwise, the product
may differ from the one shown in this leaflet. Approved by
the appropriate Electrical Regulatory Authorities. Backed
by Sunbeam‘s 12 Month Replacement Guarantee and
National Service Network.
© Copyright. SUNBEAM CORPORATION LIMITED 2001.
(INCORPORATED IN N.S.W.) A.C.N. 000 006 771
For more information or advice on any Sunbeam products,
contact the Sunbeam Consumer Service Line on 1800 025 059
in Australia. In New Zealand - contact the Sunbeam Office in
Auckland on 09 912 0747.