Sony MSW-M2000 User Manual
Page 113
Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-13
Menu items in the range 300 to 399, relating to editing operations (Continued)
318
EDIT RETRY
For two-VTR editing, set when this unit is used as the recorder. Selects the
operation if the recorder was not synchronized in time.
OFF: Editing is not carried out, and the unit stops.
ON : The editing is automatically retried (up to twice).
319
PREREAD SELECT
Specify the preread operation.
A/V : Preread for both audio and video.
AUDIO: Preread for audio only.
VIDEO: Preread for video only.
The preread operation is enabled when the function menu item PREREAD is set
to ON or with a command from the 9-pin remote control interface.
Item number
Item name
Settings
320
DIGITAL AUDIO PB
PROCESS ON EDIT
POINT
Select the treatment of audio playback at edit points.
CUT : Carry out a cut (possibly resulting in audio discontinuities at the edit point).
FADE: Fade out and fade in.
326
AUTOMATIC IN ENTRY
AFTER AUTO EDIT
Select whether or not to automatically set the OUT point of the previous edit as
the next IN point at the end of an automatic edit.
OFF : No automatic setting
R: Set recorder IN point automatically.
R & P: Set recorder IN point automatically, and also player IN point in two-VTR
editing.
329
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH5
When using an editor (PVE-500, BVE-600, etc.) or a remote controller which
cannot control digital audio edit preset, select how to activate edit preset of each
digital audio channel on this unit using the analog audio edit preset function of the
editor or remote controller.
Set edit preset of each digital audio channel (channels 5 to 8) of this unit on or off
according to the analog audio preset specified by the remote controller or editor.
NODEF : No definition
CH1: Follow edit preset of analog channel 1.
CH2: Follow edit preset of analog channel 2.
CH1+2: Follow edit preset of analog channel 1 or 2.
330
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH6
331
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH7
332
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH8
317
AUDIO EDIT MODE
Select the type of audio transition used for digital audio editing.
CUT: Cut editing (audio discontinuity at transition point, and possible noise during
playback).
CROSS : Cross-fade
FI/FO: Fade in and out
t: Time set by item 803 DIGITAL AUDIO FADE TIME
IN/OUT
t
IN/OUT
t
(Continued)