Sony MSW-M2000 - Manual (Page 121)

Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-21
Menu items in the range 700 to 799, relating to video control (Continued)
(Items 715 to 721: Settings for controlling the video processing system according to the menu settings.)
Item number Item name
715 VIDEO GAIN CONTROL
716 CHROMA GAIN
CONTROL
717 CHROMA PHASE
CONTROL
718 SETUP LEVEL (525-line
mode)/BLACK LEVEL
(625-line mode)
719 SYSTEM PHASE SYNC Adjust the output signal sync phase.
–128 to 0 to +127
720 SYSTEM PHASE SC Adjust the output signal subcarrier phase.
0 to 1023
721 Y/C DELAY
Note
When you make settings for items 715 to 721, set the
function menu item V.PROC to MENU. When it is set to MENU, all controls for video output
processing on the control panel are disabled.
Item number Item name Settings
723 INPUT VIDEO BLANK Switch blanking on or off for individual lines in the vertical blanking interval of an
input video signal. The Y/C signal and odd/even fields are blanked
simultaneously.
A signal with blanking carried out according to this setting is recorded.
Sub-Item
0 ALL LINE - - - : Specify the blanking for each line separately.
BLANK: Regardless of the setting of other sub-items, blank all lines which can be
specified in this menu item.
THROU: Regardless of the setting of other sub-items, switch off blanking for all
lines which can be specified in this menu item.
12 ...
20 LINE 12 ... LINE
20 In 525-line
mode Specify blanking for lines 12 to 20.
BLANK: Carry out blanking.
THROU : Switch off blanking.
In 625-line
mode 9 ... 22 LINE 9 ... LINE 22 Specify blanking for lines 9 to 22.
BLANK: Carry out blanking.
THROU : Switch off blanking.
(Continued)
Settings
Adjust the video output level.
–2048 to 0 to +848
Adjust the chroma output level.
–2048 to 0 to +848
Adjust the chroma phase.
–128 to 0 to +127
Adjust the setup level (black level).
–272 to 0 to +272
For playback from an analog Betacam cassette, adjust the Y/C delay.
–2048 to 0 to +2047