Sony MSW-M2000 - Manual (Page 114)

Chapter 9
Setup Menus
9-14
Chapter 9 Setup Menus
9-4 Items in the Extended Setup Menu
Menu items in the range 300 to 399, relating to editing operations (Continued)
Menu items in the range 400 to 499, relating to preroll
Item number Item name Settings
401 FUNCTION MODE
AFTER CUEUP Select the state that the unit goes into after a cuing-up operation.
STOP : Stop (the “stop mode”)
STILL: Still playback (in search mode)
Note
When controlling this unit from an editor with the standard constants set, select
“STOP”.
402 TIME REFERENCE FOR
PREROLL When prerolling a tape with time code discontinuities, select whether or not to use
CTL pulses to count time code from before a discontinuity.
CTL : Use CTL pulses to count time code.
TC: Do not use CTL pulses to count time code.
403 AUTOMATIC PREROLL
REFERENCE ENTRY Select whether or not the edit IN point is automatically set by pressing the
PREROLL button, when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
405 CUEUP BY CTL Select the tape transport mode when cuing. This setting is valid only when the
function menu item CTL/TC is set to CTL.
CAP. : During cuing up, the tape transport is in the “pinch ON” state (maximum
tape speed 10 times normal).
REEL : During cuing up, the tape transport is in the “pinch OFF” state. As the
tape approaches the cue up point and the tape speed drops, the tape transport
switches to the “pinch ON” state.
a)
To give priority to editing accuracy, select “CAP”.
Item number Item name Settings
334 EE REFERENCE
CONTROL Specify how to select the reference video signal in E-E mode.
normal : Select according to the flowchart in Section 3-2-1 “External Sync Signal
for the Internal Reference Video Signal Generator” (page 3-4).
input: In E-E mode select the input video signal. When not in E-E mode, select
according to the flowchart in Section 3-2-1 “External Sync Signal for the
Internal Reference Video Signal Generator”
(page 3-4).
336 EDIT PRESET INHIBIT IN
KEY PANEL CONTROL Specify which buttons are disabled in the editing mode setting section on the
lower control panel.
off : Disable all buttons.
TC: Disable the TC button.
333 DIGITAL AUDIO EDIT
PRESET REPLACE Select how to apply digital audio edit preset from an external controller.
NODEF : Apply edit preset for channels 1 to 8 from external controller to tracks 1
to 8, correspondingly.
PARA: Apply edit preset for channels 1 to 4 from external controller to tracks 1
and 5, tracks 2 and 6, tracks 3 and 7, and tracks 4 and 8, respectively. Ignore
edit preset for channels 5 to 8.
REVRS: Apply edit preset for channels 1 to 4 and channels 5 to 8 from external
controller to tracks 5 to 8 and tracks 1 to 4, respectively.
STERE: Apply edit preset for channels 1 to 4 from external controller to tracks 1
and 2, tracks 3 and 4, tracks 5 and 6, and tracks 7 and 8, respectively. Ignore
edit preset for channels 5 to 8.
a) When controlled from an editor (BVE-2000/9100 etc.),
selecting “REEL” allows high-speed cuing up.