SIGMA DP2 - Manual (Page 60)

59
PICTURE SETTINGS
It is possible to adjust the recording image parameter (contrast,
sharpness and saturation).
Contrast
Contrast can be increased by moving the cursor to + side, or
decreased, preserving image detail, by moving the cursor to - side.
Sharpness
It is possible to make the pictures appear sharper, by moving the
cursor to + side, or softer by moving the cursor to – side,.
Saturation
It is possible to increase saturation thus making pictures appear vivid, if
the cursor is moved to + side. Moving the cursor to – side, decreases
saturation and makes images less vivid.
Picture Settings can be set in [ Capture Settings] (P.26) →
[Picture Settings].
Use the arrows on the 4-way controller
to select [Contrast], [Saturation],
[Sharpness] from [Picture Settings],
then press the
arrows on the 4-way
controller to adjust the compensation.
Press the
button to apply the setting
or the button to close the
sub-menu without making any changes.
If you adjust image parameters, their icon is displayed on
the left of the color LCD monitor.
TIP
•
JPEG is compressed after parameter adjustment. In the case of
RAW format, parameter information is recorded without
adjustment. It is possible to re-adjust RAW images using the
supplied Sigma Photo Pro software.