SIGMA DP2 - Manual (Page 77)

76
TIP
•
To manually turn off the Quick Preview image, press the shutter button
half-way.
•
It will not be possible to zoom in to the preview image, or change to
another image while the Quick Preview is up.
REVIEWING IMAGES
The pictures captured by the DP2 can be reviewed in various
ways.
To review images captured by the DP2 camera press the
button on the back of the camera. The last image recorded on the
card will be displayed on the color LCD monitor.
Press the button to display an image on the color
LCD monitor.
Press the button again to change to shooting
mode.
TIP
•
Even if the camera is switched off, images can be reviewed by pressing
and holding the
button for 2 seconds.
•
If no new images have been captured, the last reviewed image will be
displayed.
•
If there are no images on the card, an error message “No images on
Memory card” will be displayed.
•
When reviewing images, if the button is pressed or the shutter
button is pressed “half-way”, the DP2 will be changed back to shooting
mode.