Auto rotate – SIGMA DP2 User Manual
Page 71
70
AUTO ROTATE
It is possible to record the vertical image information to images.
The Auto Rotate can be set by [
Capture Settings] (P.26) → [Auto
Rotate].
Off
The vertical image information will not be recorded.
On*
The vertical image information will be recorded.
The default setting is [On].
●
When vertically orientated images are reviewed, they will
automatically rotate and be displayed vertically.
● When vertically orientated images are reviewed in Sigma Photo Pro,
they will automatically rotate and be displayed vertically.
●
When vertically orientated images are rotated by pressing
[
Playback Menu] → [Rotate], this rotated orientation will be
stored.
WARNING !!
•
If the images are taken while the camera is pointed up or down, the
vertical position information may not be recorded properly.