Ad v a nced f e atures, Connecting other equipment (continued), Headphones – Sharp SD-HX600 User Manual
Page 70: Using subwoofer
E-65
SD_HX600_SEC_SECL_E6.fm
04/3/15
ENGLISH
TINSKA016AWZZ
SD-HX600
Ad
v
a
nced
F
e
atures
- Conne
c
ting othe
r e
quipme
n
t -
Connecting other equipment (continued)
Headphones and the subwoofer audio cable are not supplied.
!
Headphones
"
Before plugging in or unplugging the headphones, reduce the volume.
"
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance
between 16 and 50 ohms. The recommended impedance is 32 ohms.
"
While headphones are connected, sound is not produced from the speakers.
"
You cannot use the surround feature with headphones.
"
Do not plug in or unplug headphones while recording. The sound may skip.
!
Using subwoofer
You can connect a subwoofer with an amplifier to the subwoofer pre output jack.
Note:
No sound is heard from the speaker in which an amplifier is not built in.
Turn off all equipment before making this connection.
Amplifier unit
Main unit
Headphones
To audio input jack
Subwoofer
(with a built-in
amplifier)
Audio cable
(commercially
available)
(Left side)