Bed identification numbers, Joerns easy care standard features, Accessories and options – Sunrise Medical JOERNS B684DC User Manual
Page 5: Bed weight capacity, Environmental conditions, Mechanical specifications, Electrical specifications
5
Features and Specifications for Your Joerns Easy Care 2003DC Bed
Joerns Easy Care Standard Features
76” or 80” sleep surface
Whisper-Quiet DC Motors
Grid Sleep Surface
Brown or SoftTone Frame Color
Accessories and Options
76”, 80” and 84” Mattresses
Pan Sleep Surface
F14AC or F14SC Vari-Care 1/2 Length Assist Devices
3/4 or Full Length Vari-Care Side Rails
F025 Assist Handle
Casters - 2 or 4 locking
Griplock
Bed Panels
Staff Control
4” Extender
Baseboard Bumper
Trapeze Adapter
IV Rod
Floor Mat
Mattress Side Stops
Push Bar
Emergency Battery Backup System
• Battery Backup 24V
• Battery Charger 24V
• Wall Mounting Bracket for Charger
Bed Identification Numbers
When ordering parts, or when contacting our Customer
Care Department, please include the Model and Serial
Numbers of the bed, found on the identification label.
The identification label is located on the frame of the bed
under the foot section of the sleep deck.
Bed Weight Capacity
The Joerns Easy Care 2003DC bed has a maximum capacity
of 500 pounds distributed evenly on the sleep surface, and a
normal working load of 300 pounds. This is the total weight
of the resident, mattress, bedding, accessories and other
medical equipment in use. Do not use water mattresses
that allow water to flow to the foot end when the head is
raised.
Environmental Conditions
Operating Conditions:
Ambient Temperature:
+10C to +40C
Relative Humidity:
30% to 75% Non-Condensing
Atmospheric Pressure:
700 hPa to 1060 hPa
Protected Against Water IPX1
Storage and Shipping Conditions:
Ambient Temperature:
-40C to +70C
Relative Humidity:
10% to 100%
Atmospheric Pressure:
500 hPa to 1060 hPa
Mechanical Specifications
Dimensions:
76” bed: 81.5”L x 35.0”W x 14.5”H
80” bed: 85.5”L x 35.0”W x 14.5”H
Weight:
200 lbs.
Maximum Back Angle:
65° to horizontal
Maximum Knee Angle:
35° to horizontal
Maximum Knee to Leg Angle: 45°
Maximum Height Mattress
Support Surface Above Floor: 25” (23” with XL option)
Minimum Height Mattress
Support Surface Above Floor: 14.5” (12.5” with XL option)
Electrical Specifications
Power:
108-132 VAC
Frequency:
60 Hz
Current Rating:
1.6 Amps (110-120V Unit)
Classification:
Class 2, Type B
(Double Insulated)
Circuit Protection:
250V, F1.6A (110-120V Unit)
Mode of Operation:
10% Maximum duty cycle