Samsung SWL-3000AP - Manual (Page 67)

63
⑥ If all the steps above are executed correctly, then the following menu will be
displayed on the HyperTerminal window. The default password is “public”, and
user can change password later.
⑦ When the password is entered, the following [ROOT] menu appears on the
HyperTerminal window.
⑧ When AP setting procedure is completed, close HyperTerminal window. If this
is your first installation, on closing the HyperTerminal, you will get the
message “Do you want to save session AP Manager?”. Then, click [yes]
button to save HyperTerminal setting.
==================================================
Samsung SWL-3300AP Configuration
==================================================
To configure the Access Point, the password is required.
Enter password :
==================================================
Samsung SWL-3300AP Configuration
==================================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Server [Menu]
4. Status [Menu]
5. Load default values
6. Save and reboot
CMD(t, p, h):
t: Top Menu([ROOT])
p: Previous Menu
h: Help