Setting time and power level, Setting magnification factor – Sharp R-21LC User Manual
Page 10
9
NO.
X2
NO.
NO.
Memory program entry
You can change memory programs for memory
banks. See time cooking on page 11.
R-21LT
Memory banks
20
Cooking stage
Memory NO.1 -10
max. 3 stages
Memory NO. 11-20 max. 2 stages
R-21LV
Memory banks
10
Cooking stage
1 stage
The R-21LV can be programmed only using 100%
power. Follow steps 1,2,3 and 7 below.
Setting time and power level
* Suppose you want to set 4 minutes at 60% for the
1st stage and 2 minutes at 30% for the 2nd stage
for 1 serving in memory 1.(R-21LT)
Note: 1. (For R-21LT)
If you want to set memory 11-20, press
the desired number pad twice.
2. If the cooking time is over the maximum
time, the display will show “EE 9”. See
page 11.
3. At step 1, no audible signal will be heard
when the SET pad is touched the first
time. An audible signal will sound when
the SET pad is touched the second time.
Setting magnification factor
Ovens are shipped with a magnification factor of 1.7
for DOUBLE QUANTITY.
You can change the magnification factor for double
quantity and have it stored in the memory.
* Suppose you want to set the magnification factor to
1.67 for double quantity in memory 1.
1 Touch SET pad twice
within 2 sec.
2 Touch DOUBLE
QUANTITY pad.
3 Touch number pad 1.
4 Touch SELECTATIME
pad.
5 Touch NUMBER pads
1,6 and 7.
6 Touch SET pad twice.
Procedure
Display
SET
x 2
1
NO. X2
SELECTATIME
Note: 1. In case you want to change the magnifica-
tion factor it must be set for each
pad
separately.
2. The magnification factor can be set from
0.00 to 9.99.
3. At step 1, no audible signal will be heard
when the SET pad is touched the first time.
An audible signal will sound when the SET
pad is touched the second time.
SET
x 2
X2
X2
DOUBLE
QUANTITY
1
6
7
1 Touch SET pad twice
within 2 sec.
2 Touch number pad.
3 Enter cooking time for
1st stage.
4 Enter power level in
1st stage.
5 Enter cooking time for
2nd stage.
6 Enter power level for
2nd stage.
7 Touch SET pad twice.
Procedure
Display
6
1
x 2
SET
SELECTAPOWER
NO.
2
0
0
SELECTATIME
3
SELECTAPOWER
SET
x 2
SELECTATIME
4
0
0