Sharp R-21LC - Manual (Page 12)

11
START
Time cooking
R-21LT
Your oven can be programmed for up to 3 cooking
sequences and has 11 preset microwave power
levels.
Cooking sequence Max.3 stages
Microwave power level 0~100%
Cooking time Max. 30 minutes for
each stage.
And total cooking time
is max.30 minutes.
SELECTAPOWER
5
2 Enter power level.
(R-21LT only)
3 Touch START pad.
This model has 11 power levels. Use correct number
pad after touching SELECTAPOWER pad.
100% -
90% 9
80% 8
70% 7
60% 6
50% 5
40% 4
30% 3
20% 2
10% 1
0% 0
Microwave
POWER level
Number pads Display
R-21LV
Your oven can be programmed for only one stage on
100% power level with a maximum of 30 minutes.
Follow steps 1 and 3.
Cooking sequence 1 stage
Microwave power level 100% only
Cooking time Max. 30 minutes
1 Enter cooking time.
* Suppose you want to cook for 2 minutes and 30
seconds at 50%.
Procedure Display
SELECTATIME
2 3 0
MANUAL OPERATIONS
ON
START
Note: It is not necessary to touch SELECTAPOWER
pad for 100%. If the cooking time is over the
maximum time, the display will show “EE 9”.
Multiple sequence cooking
(R-21LT only)
*Suppose you want to cook for 4 minutes at 60 % for
1st stage and then contimue to cook for 2 minutes
at 30% for 2nd stage.
1 Enter cooking time in
1st stage.
2. Enter power level in
1st stage.
3. Enter cooking time in
2nd stage.
4. Enter power level in
2nd stage.
5. Touch START pad.
Procedure Display
SELECTATIME
4 0 0
SELECTAPOWER
6
ON
3
SELECTAPOWER
SELECTATIME
2 0 0