Sceptre Technologies X32 - Manual (Page 30)

SCEPTRE X32 HDTV User Manual
- 30 -
www.SCEPTRE.com
Connecting Your Satellite or Cable Set-
top box to the TV
If You Want the Best Connection with HDMI…
1. Make sure the power of X32 LCD HDTV and your set-top box is turned
off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the
other end to the HDMI port off the back of your X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI.
Please Note :
• Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
• Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.