Sceptre Technologies X32 - Manual (Page 33)

SCEPTRE X32 HDTV User Manual
- 33 -
www.SCEPTRE.com
Please Note :
• If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (S-Video).
• Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Video connector port. DO NOT CONNECT BOTH.
• Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
• Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
If You Want the Fair Connection with Composite…
1. Make sure the power of X32 LCD HDTV and your set-top box is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and Composite 1’s Yellow Video connector
port off the back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1’s white connector port off the
back of your X32 LCD HDTV.