Samsung Digimax350 SE - Manual (Page 35)

ADV
ANCED
SETTING UP THE SHOOTING FUNCTION
OK button
Used as a confirming data that is changed by using / / / buttons.
FLASH / LEFT button
When the menu is displayed on the LCD monitor, pressing the button makes the cursor
shift to the left or to the main menu.
When the menu is not displayed on the LCD monitor, the button operates as the FLASH
button.
Use the correct flash to suit the environment.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or
NIGHT SCENE mode.
3. Do not turn the LCD monitor off.
4. Press the FLASH button until the desired FLASH mode
indicator displays on the LCD monitor.
5. Take a picture. < Selecting Auto flash >
Note
Photograph within the flash range. The flash ranges are listed below
The image quality is not guaranteed if the subject is too close or highly reflective.
ISO W T
AUTO 0.8 ~ 3m 0.8 ~ 2m
100 0.8 ~ 3m 0.8 ~ 2m
200 1.6 ~ 4m 1.6 ~ 3m
400 2 ~ 4.6m 2 ~ 3.6m
AUTO 0.2 ~ 0.8m 0.2 ~ 0.8m
100 0.2 ~ 0.8m 0.2 ~ 0.8m
200 0.4 ~ 0.8m 0.4 ~ 0.8m
400 0.6 ~ 0.8m 0.6 ~ 0.8m
Normal
Macro