Samsung Digimax350 SE - Manual (Page 37)

ADV
ANCED
SETTING UP THE SHOOTING FUNCTION
SELF-TIMER / RIGHT button
When the menu is displayed on the LCD monitor, pressing the button makes the cursor
shift to the sub menu.
When the menu is not displayed on the LCD monitor, the button operates as the SELF
TIMER button.
This function is used when the photographer would also like to be in the image.
1. Turn the camera power on.
2. Rotate the mode dial to the shot mode (Still image, Night
scene, Movie clip).
3. Do not turn the LCD monitor off.
4. If the self-timer indicator is displayed on the LCD monitor
by pressing the SELF TIMER button, the setting is
completed.
5. Pressing the shutter button will allow an interval of ten
seconds before the image is taken.
After that, the self-timer is canceled.
< Selecting Self Timer >
Reference
The default is OFF
The self-timer LED lamp(red) and Self timer indicator on the LCD monitor will blink for 10
seconds after the SELF-TIMER button has been pressed.
- For the first seven seconds, the LED blinks at one second intervals
- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
If you operate the Power button, Mode dial, and Self-timer button during the self-timer
operation, the self-timer function is cancelled.