Setting up camera system – Samsung Digimax350 SE User Manual
Page 76
SETTING UP CAMERA SYSTEM
LCD
You may adjust the LCD brightness.
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode( ).
3. [SETUP 1/3] menu will display on the LCD monitor.
4. Select [SETUP 3/3] menu by pressing the LEFT (
) /
RIGHT (
) buttons.
5. Press the DOWN button (
) and select [LCD].
6. Shift the cursor to the [LCD] sub menu by pressing the
RIGHT button (
)
7. Select the desired sub menu by pressing the UP (
) /
DOWN (
) buttons. The LCD monitor has 7 brightness settings.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
SETUP
3/3
BACK :
SET : OK
SOUND
LCD
VIDEO OUT
QUICK VIEW
SOUND
A beep will sound when you press the camera button.
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode ( ).
3. [SETUP 1/3] menu will display on the LCD monitor.
4. Select [SETUP 3/3] menu by pressing the LEFT (
) /
RIGHT (
) buttons.
5. Press the DOWN button (
) and select [SOUND].
6. Shift the cursor to the [SOUND] sub menu by pressing
the RIGHT button (
)
7. Select the desired sub menu by pressing the UP (
) /
DOWN (
) buttons
8. After selecting the desired sub menu, press the OK button to confirm the setting.
SETUP
3/3
BACK :
SET : OK
OFF
ON
SOUND
LCD
VIDEO OUT
QUICK VIEW