Samson MediaOne 3a - Manual (Page 16)

10
MediaOne Series Front Control Panel
6. Power LED - When the Power switch is set
to "on", the light will illuminate indicating
the system is powered up and ready for
operation.
7. Volume Control - (front Panel) The
volume control is used to adjust the
overall output level of the MediaOne
Series. When operating the unit for the
first time, start with the volume control
set all the way off. Slowly raise the Volume
control to reach a comfortable listening
level. NOTE: If you press the Volume
Control, it will extend out making it easier
to adjust.
8. AUX Input - You can connect a second
stereo input from a MP3 player, keyboard,
sound card or any other stereo line level
signal to the MediaOne Series’ front panel
1/8-inch (3.5 mm) Aux Input jack.
9 . Headphone Output - If you need to
listen to your mix on headphones,
simply plug in to the front panel 1/8-inch
(3.5mm) Headphones output jack. The
speakers automatically turn off when you
plug into the Headphone output.
VOLUME
AUX
6
7
8
9
Operating the MediaOne Series
ENGLISH