Sony Ericsson NWZ-A826K - Manual (Page 7)

NWZ-A826/A826K/A828/A828K/A829
7
3-3. BATTERY
Note 1: This illustlation sees the battery assy from back.
3-4. MAIN BOARD
Note 1: This illustration sees the MAIN board from the back.
 battery
 adhesive sheet (BATT)

 BATT wire sheet
 connector
(CN901)
battery connector
lead wire
(red)
lead wire
(black)
 spacer (line in)
Note 2: When removing battery,
don't remove by the impossible power.
Note 3: Adhesive sheet (BATT) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (BATT) is removed.
Note 4: When installing battery connector,
please be careful about the color
of the lead wires as shown in a figure
and install battery connector.
 screw
(B1.4)
 spacer (line in)
 claw
 BATT wire sheet
R connector (CN601)
connector (board to board)
connector
(board to board)
 spacer (line in)
 connector (CN901)  HP flexible
print board
(CN301)
RL MAIN board
RB cushion
(PWB)
 sheet key (CN602)
 escutcheon (CN)
RI spacer
(BT-P)
RK shield plate
RT spacer
(PWB-S)
RE sheet (WM-P)
RG cushion (WM-P)
RH cushion (PWB)
RE sheet (WM-P)
battery connector
lead wire
(red)
lead wire
(black)
Note 3: When installing battery connector,
please be careful about the color
of the lead wires as shown in a figure
and install battery connector.
Note 2: Please install or
remove
connector
(board to board)
vertically.