Samsung M55 - Manual (Page 136)

7-12 Manual
Q7 The playback screen of a DVD title or an MPEG file is only dis-
played on the LCD.
A Video is displayed on a single display device by default, when LCD and CRT are
selected simultaneously.
1. Right-click over the Desktop and select Properties from the pop-up menu.
2. In the [Display Properties] window, select the Settings tab > Advanced >
GeForce Go xxxx tab.
3. Select the Full Screen Video menu> Full Screen Video Control item, set the Full
Screen Device to ‘Auxiliary Display’ and then click the Apply button. Then
you can view video on both the LCD and CRT display devices.
Q8 After connecting to a TV, some programs such as Debug, Mem,
etc. do not run in full screen MS-DOS mode.
A If a TV is used as the display device, some programs such as Debug, Mem, etc.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
Q9 The Taskbar on the bottom of the screen does not appear when
a projector is used as the display device.
A This may happen, because while WXGA+ and WSXGA+ LCD support
1440x900 and 1680x1050 modes respectively, the projector does not support
these modes. In this case change the resolution to 1024x768 (recommended) on
your computer.
Q10 Switching the MS-DOS command prompt to full screen mode or
Windows mode by pressing the <Alt>+<Enter> keys does not
operate properly.
A Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key
input to be recognized as multiple key inputs depending on the keyboard input
recognition time. In this case, the MS-DOS command prompt is repeatedly
switched to full screen and then to Windows several times. Please press the
<Alt>+<Enter>
keys more quickly, or press the <Alt>+<Enter> keys using the sys-
tem keyboard.