Modem related – Samsung M55 User Manual

Page 139

Advertising
background image

7-15

Chapter 7. Recovering the Computer

Modem Related

Q1 I cannot hear the modem sound.

A1 Check that the telephone line is properly connected to the modem.

A2 Check that the modem driver is installed properly.

1. Click Start > Control Panel > Performance and Maintenance >

System

.

2. Select Hardware tab > Device Manager > Modems in the System

Properties

window, and check if there is a yellow exclamation mark on the

installed modem icon. If there is, delete the modem device driver and reinstall
the driver, because the yellow exclamation mark represents a not properly
installed driver.

3. If there is no yellow exclamation mark, double-click the installed modem, and

click Diagnostics tab > Query Modem in the Modem Properties win-
dow to diagnose the modem.

No message in either of Command and Response in the Diagnostics tab means
that the modem is not operating properly.
Diagnose the modem again after restarting the system or reinstalling the driver.
(You have to exit all programs using modem in the advance of diagnostics of the
modem).

Q2 I cannot make a call using an extension line.

A In general, the dial tone of a PABX or a digital phone switching system is not a

continuous one, unlike that of a trunk line.
Therefore, the modem may not make a call because the modem mistakes the dial
tone from a PABX or a digital phone switching system as a busy tone.
In this case, complete the following procedures.

Using an AT command

As an initialization command, use the command, ATX3.

Otherwise, enter the ATX3 command manually before making a call.
It can correct this problem by skipping the dial tone check step.

Configuring the Modem through the Control Panel

1. Click Start > Control Panel > Network and Internet Connections
2. Under See Also, click Phone and Modem Options.
3. In the Modems tab, select the installed modem, and click Properties.
4. In the Modem tab of the Modem Properties window, clear the ‘Wait for

dial tone before dialing

’ check box.

5. When the configuration is completed, click OK.

Advertising