Sennheiser 504302 - Manual (Page 15)

Putting the headset system into operation
14
If your telephone has a built-in electronic hook switch supporting the MSH
standard:
̈
Set the DIP switch
¸
# 1 to the upper position.
̈
Set the DIP switch
¸
# 2 to the lower position.
The necessary connection and adapter cables are available from your
Sennheiser partner. For additional information, please visit our website at
www.sennheisercommunications.com/headsetselector.
Setting up the base station
̈
Place the base station at a minimum distance of 15 to 20 cm from the
fixed line phone.
Connecting the base station to a PC
You can connect the headset system to a PC in order to use it for Internet
telephone (VoIP) with softphones or multimedia applications.
̈
Use the USB cable
ƽ
to connect the PC socket
Ƹ
to a USB socket of
your PC.
The operating system detects the USB audio device “Sennheiser DECT”
and installs the necessary drivers.
MSH standard
MSH cable
DW Office MSH setting e.g. Alcatel
Ƹ
ƽ