Sennheiser 504302 - Manual (Page 28)

27
Using the headset system
Making a PC call
̈
Establish a wireless link between headset and base station (see
page 23).
̈
Make the call using your softphone.
Ending a PC call
̈
Disconnect the wireless link between headset and base station (see
page 23).
̈ End the call using your softphone. If the call control function of your
softphone is supported, the call is automatically ended (see page 15).
Reproducing PC audio via the headset
The HeadSetup software allows you to listen to all PC audio via the
headset.
To activate/deactivate the reproduction of PC audio via the headset:
̈
In the HeadSetup software, activate/deactivate the “Always Audio”
function by clicking the corresponding button.
All PC audio is permanently reproduced via the headset. The wireless
link between headset and base station remains permanently estab-
lished.
If the “Always Audio” function is deactivated, the icon on the button is
crossed out in red.
If the “Always Audio” function is activated, you can still accept calls
via the
Phone mode. After ending the call, the base station auto-
matically switches back to PC mode and all PC audio is reproduced
via the headset.