Testing the headset system in, Phone – Sennheiser 504302 User Manual
Page 18
17
Putting the headset system into operation
Swapping the assignment of the AUDIO button
The assignment of the AUDIO button
whether you wear the headset on the right or left ear. By default, the
headset is configured for wearing on the right ear. Pushing the AUDIO
button
upwards increases the volume, pushing it downwards reduces
the volume (see page 28).
To swap the assignment of the AUDIO button
:
̈
Simultaneously press and hold the headset’s LINK button
for 5 seconds.
flashes blue/red.
̈
Push the AUDIO button
in the direction in which you want to
increase the volume until the HEADSET LED
goes off.
The headset switches to standby mode.
Testing the headset system in
Phone
mode and
adjusting it
Testing the telephone connection
When
PC
mode is selected (the LED of the PC button
lights up white):
̈
Press the PHONE button
on the base station.
The base station is set to
Phone
mode and the LED of the PHONE button
lights up white.
̈
Press either the LINK button
on the headset or the PHONE
button
on the base station.
A wireless link is established between the headset and the base
station, the LINK LED
lights up blue and the HEADSET LED
flashes
blue.
5 s
Left
Right
5
4
3
»
4
¿
3