Siemens MCM 1902 - Manual (Page 17)

Color monitor MCM 1902
A26361-K527-Z100-2-5E19 English - 9
Ê Plug the power cable supplied into the power connector (1) of the monitor.
Ê Plug the power cable into the monitor connector at the rear of the system unit.
Ê Plug the power connector of the system unit into a properly grounded power outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
Operation of the monitor
1
2 3
1 = Control panel with buttons for screen
setting
2 = Power indicator
3 = ON/OFF switch
Switching the monitor on
Ê Press the ON/OFF switch (3).
The power indicator (2) lights up green when the system unit is turned on.
i
If your PC has a power management function (energy-saving mode), you should read the
notes on power management of the monitor in this chapter.
When you start your system, several mode changes will usually be carried out when
various programs are called automatically (different settings for resolution and image
refresh rate). Do not be confused by the unusual displays. They are not error messages.
Switching the monitor off
Ê Press the ON/OFF switch (3).
The power indicator (2) is dark.