Siemens MCM 1902 - Manual (Page 24)

Color monitor MCM 1902
16 - English A26361-K527-Z100-2-5E19
Electrical data
Video:
Synchronization:
Line frequency:
Refresh rate:
Maximum pixel rate:
Power supply:
analog, positive, 0.7 Vpp, 75 Ohm
Separate Sync. TTL
Composite Sync. TTL/ Sync. on Green
30 kHz .... 96 kHz (multi-scanning)
50 Hz .... 160 Hz
207 MHz
switches automatically
100 V - 127 V, 50 Hz - 60 Hz ± 3 Hz, < 2 A
200 V - 240 V, 50 Hz - 60 Hz
±
3 Hz, < 1 A
Power consumption:
(see power management):
< 110 W (ON, Normal mode)
< 70 W (Standby mode)
< 15 W (Suspend mode)
< 5 W (OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
Limit range of operation:
Humidity:
15 ˚C .... 35 ˚C
20 % .... 85 %
5 ˚C .... 40 ˚C
20 % .... 85 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
i
If the monitor MCM 1902 is not yet displayed in the list of monitors, you can select one of
the following monitors instead:
Siemens Nixdorf MCM 2109, MCM 2107, MCM 2105, MCM 2102, MCM 1706,
MCM 1705, MCM 1704, MCM 1703, MCM 1702