Product description – Sharp LL-T1815 User Manual
Page 9
9
English
Deutsc
h
Français
Italiano
Español
English
Product description
2
3
4
5
6
8
11
13
14
12
7
10
15
7
15
9
1
1. INPUT button .............................. To switch between the signal’s input terminals.
2. MENU button ............................... This button is used to pop-up, select and close the OSD (On Screen
Display) Menu.
3.
button ...................................... This button is used to select menu options when the OSD Menu is
displayed.
4.
buttons ................................ When the OSD Menu is displayed:
These buttons are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness and speaker
volume.
5. Power button
6. Power LED .................................. This LED is lit green when in use and orange when in power-saving
mode.
7. Speakers ..................................... Audio entering via the monitor and the external device connected to
the monitor can be heard.
8. Headphone terminal ................... Headphones (commercially available) can be connected here.
9. Audio input terminal .................... A computer’s audio output terminal can be connected here. The
audio cable included should be used.
10. DVI-I input terminal (INPUT-2) .... The computer’s digital RGB output terminal or analog RGB output
terminal can be connected here.
Separately sold cables are necessary for connection. (p.8)
For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.
11. Analog RGB input terminal ......... The analog signal cable is connected here.The analog signal cable
included should be used.
12. Security lock anchor ................... By connecting a security lock (commercially available) to the security
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
13. Power terminal
14. Main power switch
15.Ventilation openings .................... Note: Never block the ventilation openings as this may lead to
overheating inside the monitor and result in malfunction.
(INPUT-1)