Smeg PLA8743X - Manual (Page 16)

Rev 0.0
15
USER INSTRUCTIONS EN
HALF OF THE CUTLERY BASKET CAN BE PLACED IN THE RACK
SELECTED FOR ½ LOAD WASHING.
ATTENTION: THERE IS NO POINT IN LOADING DISHES AND
CUTLERY IN THE UNSELECTED RACK AS THE WATER WILL
ONLY REACH THE SELECTED RACK.
PROGRAM DELAY
Press the Program delay button (ref. 4 fi g. 2-03) to select a pre-washing
program delay of up to 12 hours from when programming takes place. This
makes it possible to use the dishwasher at a certain time of day.
Before programming a delay, select the required washing program (see para
2.2 “Setting the washing program and switching on and off”).
Press the Program delay button (ref. 4 fi g. 2-03). The display shows the num-
ber of hour’s delay before the appliance starts, starting from 1 hour. In particu-
lar, the display will appear as shown in fi gure 2-09.
After selecting the delay, start the program by pressing the start/pause but-
ton (ref. 5 fi g. 2-03) for a few seconds until the clock symbol starts fl ashing.
The dishwasher will perform a pre-wash cycle, after which the preset “program
delay” will commence.
Fig. 2-07
Visualizzazione su display Display