Smeg PLA8743X - Manual (Page 99)

36 Rev 0.0
INSTALLATION INSTRUCTIONS EN
Before securing the dishwasher to the adjacent units, attach the gaskets to
the sides.
Remove the adhesive band on the gasket (see fi g. 5-37).
Fig. 5-37
Fix the gasket to the dishwasher, inserting it in the seat on the sides towards
the front (see fi g. 5-38), and making sure that the long side of the gasket, the
one with the hole for inserting the screw, is attached to the outside of the dish-
washer; the hole in the long side must match the hole in the dishwasher (see
ref. A fi g. 5-39). Make sure the gasket adheres perfectly to the dishwasher.
Fig. 5-38