Specifications, Troubleshooting, Additional information – Sony CDP-CX571 User Manual

Page 17

Advertising
background image

Additional Information

16

Specifications

Compact disc player

Laser

Semiconductor laser (

λ

= 780 nm)

Emission duration: continuous

Laser output

Max 44.6

µ

W*

* This output is the value measured at

a distance of 200 mm from the
objective lens surface on the Optical
Pick-up block with 7 mm aperture.

Frequency response

2 Hz to 20 kHz ± 1 dB

Signal-to-noise ratio

More than 100 dB

Dynamic range

More than 88 dB

Harmonic distortion

Less than 0.013 %

Channel separation

More than 95 dB

Output

LINE OUT

General

Power requirements

Where purchased

USA/Canada

Australia (CDP-CX50 only)

UK

Australia/Singapore
(CDP-CX571 only)

Other countries

Power consumption

12 W

Dimensions (approx.)

When the front cover is closed

(w/h/d)

430

Ч

182.5

Ч

295 mm (17

Ч

7 1/4

Ч

11 5/8 in.) incl. projecting parts

When the front cover is open
430

Ч

182.5

Ч

414 mm (17

Ч

7 1/4

Ч

16 3/8 in.) incl. projecting parts

Mass (approx.)

5.0 kg (11 lbs 4 oz)

Supplied accessories

Audio cord (2 phono plugs – 2 phono plugs) (1)
CD booklet holder (1)

Design and specifications are subject to change without notice.

Troubleshooting

If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.

There is no sound.

/

Check that the player is connected securely.

/

Make sure you operate the amplifier correctly.

The CD does not play.

/

There is no CD in a slot (“–no dISC–” appears).

Insert a CD.

/

Insert the CD with the label side facing right.

/

Clean the CD (see page 15).

/

Moisture has condensed inside the player. Open

the front cover and leave the player turned on
for about an hour (see page 15).

The player functions incorrectly.

/

The microcomputer chips may be operating

incorrectly. Disconnect the AC power cord, then
connect it back to the wall outlet to reset the
player.

Load impedance

Over 10 kilohms

Maximum
output
level

2 V
(at 50 kilohms)

Jack
type

Phono
jacks

Power requirements

120 V AC, 60 Hz

240 V AC, 50 Hz

220 V – 230 V AC, 50/60 Hz

110 V –120 V or 220 V – 240 V
AC, adjustable, 50/60 Hz

110 V –120 V or 220 V – 240 V
AC, adjustable, 50/60 Hz

Advertising
This manual is related to the following products: