Sony CDP-CX571 - Manual (Page 6)

Playing CDs Getting Started
5
Getting Started
Hookups
When connecting the audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
CD player Amplifier
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note on placement
Be sure to place the player on a horizontal place.
If the player is slanted, it may cause malfunction or
damage the player.
Inserting CDs
You can insert up to 51 discs into this player.
POWER Front cover JOG
Rotary table
Loading position
Playing position
1
Press POWER to turn on the player.
2
Open the front cover by pushing the right edge of
the cover.
Front cover
(Continued)
INPUT
CD
L
R
LINE
OUT
L
R
Setting the voltage selector (voltage
selector equipped models only)
Check that the voltage selector on the rear panel of the
player is set to the local power line voltage. If not, set
the selector to the correct position using a screwdriver
before connecting the AC power cord to a wall outlet.
220 - 240 V 110 - 120 V