Spectrum Brands TELEMATRIX SP-400 - Manual (Page 23)

Using A Flash When Dialing
To use a Flash, simply press the Flash key at the appropriate point in the number sequence being
dialed from the key pad.
Programming Flash Timing into Memory
Flash Timing can be programmed into the SpectrumPLUS
TM speed dial memory. This function
allows the user to dial a timed line break in the sequence of the dialing patterns when using the
speed dial keys. This function may be required for accessing line features provided by your
telephone system or local telephone company.
Programming The Flash Timing
To Program Flash Timing
1. Press the STORE key.
2. Enter the desired flash timing by entering
the desired timing using dial key pad. The
timing can be programmed between 100mS
to 1000mS. Check with your local service
provider or PBX provider to select the
appropriate correct timing.
3. The factory default Flash timing is
programmed at 600mS, which is the most
used timing option.
NOTE: Each “Flash” function counts as 1 digit when stored into a speed dial memory location..
23