Spectrum Brands TELEMATRIX SP-400 - Manual (Page 26)

Programming Procedure
1. Speed dial programming must be done with the telephone plugged into the telephone line.
2. The handset must be “off-hook” or Speakerphone On.
3. Press the “Store” key.
4. Dial the telephone number that is to be saved using the numeric dial pad.
5. Press the desired speed dial location keys (1-11) in which the number is
to be saved.
6. To program additional numbers, repeat steps 3 thru 7.
7. Place the convenient pre-printed speed dial keycaps on the selected speed dial memory key
or complete the paper index card and place it into the clear protective keycap. Install the
keycap on the appropriate speed dial memory key.
Programming Procedure For SpectrumPlus tm Speed Dial Features
The SpectrumPLUS T M Telephone has 11 one-touch speed dial locations that are convenient for
dialing frequently used telephone numbers. Each speed dial location can store up to 32 digits.
Follow the procedure below for programming the speed dial information.
Note 1: Speed dial programming must be done with the telephone plugged into the telephone
line and power adapter.
Note 2: Programming can be performed with the telephone on-hook.
NOTE: Blank index card sheets are provided for
convenience. Complete and place the index
card into the speed dial memory key.
26