Siemens SED2 User Manual
Page 6
European Low Voltage Directive
The SED2 VFD product range complies with the requirements of the Low Voltage Directive
73/23/EEC as amended by Directive 98/68/EEC. The units are certified for compliance with
the following standards:
EN 60146-1-1
Semiconductor VFDs - General requirements and line commutated VFDs
EN 60204-1
Safety of machinery - Electrical equipment of machine
European Machinery Directive
The SED2 VFD series does not fall under the scope of the Machinery Directive. However, the
products have been fully evaluated for compliance with the essential Health & Safety
Requirements of the directive when used in a typical machine application. A Declaration of
incorporation is available on request.
European EMC Directive
When installed according to the recommendations described in this guide, the SED2 VFD
fulfils all requirements of the EMC Directive as defined by the EMC Product Standard for
Power Drive Systems EN50082-2.
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT 5B33 for use in a pollution
degree 2
ISO 9001
Siemens plc operates a quality management system, which complies with the requirements of
ISO 9001.