Sony IT-M704 - Manual (Page 23)

Basics
Basics
23 US
1
Pick up the handset (or press
(SPEAKERPHONE)).
“=== TALK ===” appears on
the display, and then the
operation duration in hours,
minutes and seconds is
displayed.
The connected line button lights
up.
When you want to select the line
beforehand, press (LINE 1),
(LINE 2), (LINE 3) or (LINE 4).
The corresponding line button
lights up.
2
Dial the phone number.
The phone number dialed
appears on the display.
3
When you’re done talking,
replace the handset in the cradle
(or press (SPEAKERPHONE)).
The disconnected line button
goes off.
Note
If there is a line put on hold, you cannot make a call by just picking up the
handset and pressing (SPEAKERPHONE) in step 1. Press a line button that is not
used first, and then dial the phone number.
Tip
If you pick up the handset during speakerphone conversation, it will change to
handset conversation, and conversely when you press (SPEAKERPHONE)
during handset conversation, it becomes speakerphone conversation.
Basics
Making calls
TONE b(*)
(HOLD)
(SPEAKERPHONE)
(LINE 1)
(MUTING)
(REDIAL/PAUSE)
(BUSY REDIAL)
(VOLUME)
(LINE 2)
(LINE 3)
(LINE 4)
continued