Talking between the phones (intercom) (continued) – Sony IT-M704 User Manual

Page 38

Advertising
background image

38

US

Intercom Operation

Talking between the phones (Intercom) (continued)

Notes
• An intercom call is available between two phones only. If the other phone are

busy with intercom, page, or all page, you will hear a busy tone and “BUSY”
will be displayed.

• If the other phone is in Do Not Disturb mode, you will hear a short busy tone

and “DO NOT DISTURB” will be displayed.

• While conversing with an outside caller via the phone receiving an intercom

call, you cannot make an intercom call. If you press

(INTERCOM), you will

hear a busy tone.

• If you enter your station number mistakenly in step 3, you will hear five short

error beeps. If you enter a station number which has not been assigned, “NO
ANSWER” will be displayed.

Tips
• When you receive an intercom call, the phone will ring at a low level even

when the “RING VOLUME” is set to “OFF”.

• While on an intercom call, the INTERCOM lamp on the connected two

phones lights up and on other phones flashes.

• If you press (INTERCOM) in step 2 without performing step 1 on page 37, the

speakerphone will automatically turn on. When you’re done talking, press
(SPEAKERPHONE) in this case.

• If you pick up the handset during speakerphone conversation, it will change

to handset conversation, and conversely when you press

(SPEAKERPHONE)

during handset conversation, it becomes speakerphone conversation.

Advertising