Samsung 3500 - Manual (Page 62)

62
Starting the play mode
Turn the camera on and select the Play mode by pressing the play mode button ( ).
The camera can now play back the images stored in a memory.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
1. Select the PLAY mode by pressing the play mode button.
2. The last image stored on the memory is displayed on the
LCD monitor.
3. Select an image that you want to play back by pressing
the LEFT / RIGHT button.
Keep the LEFT / RIGHT button pressing and the image
are shown rapidly.
Playing back a still image
INFORMATION
Manner mode
Pressing the play mode button over 2 seconds changes the buzzer and start-up sound
setting to OFF, though you have set the settings to ON.
If you wish to hear the buzzer sound and start-up sound, set the [SOUND] and [S.SOUND]
settings in the SETUP mode to ON.
Even if the camera’s power is off, you can start the play mode by pressing the play mode button.
The LCD monitor will remain in operation until the camera is switched off in PLAY mode.
To turn off the camera power, slide the power switch.
The menu will not display on the LCD monitor under the following circumstances:
- When another button is being pressed.
- While image data is being processed
- When there is no battery capacity.