Samsung 3500 - Manual (Page 73)

73
PLA
Y
/SET
UP
Protect
This is used to protect specific shots from being accidentally erased (LOCK).
It also releases images that have been previously protected (UNLOCK).
1. Press the play mode button and press the menu button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [PROTECT] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the
[PROTECT] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
- [ONE PIC.] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
- [ALL PICS.] : All of the stored images are protected or
unprotected.
6. Select [LOCK] or [UNLOCK] by pressing the UP/ DOWN button
and press the OK button.
- [UNLOCK] : Discards the protect function.
- [LOCK]
: Sets up the PROTECT function.
If you need to protect another image, press the LEFT/ RIGHT
button.(In case of selecting [ONE PIC]
7. Press the shutter button and the menu will disappear. If you
protect an image, the protect icon will be displayed on the LCD
monitor. (An unprotected image has no indicator)
NOTICE
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
BACK:
PLAY SETUP MyCAM
SET:OK
SLIDE
PROTECT
RESIZE
DEL. ALL
ONE PIC.
ALL PICS.
EXIT:MENU
PLAY SETUP MyCAM
PAGE:
SLIDE
PROTECT
RESIZE
DEL. ALL
OFF
LOCK
LOGO
NO
EXIT:SHUTTER
MOVE PIC. :
SET:OK
UNLOCK