Samsung 3500 - Manual (Page 94)

94
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. IMAGE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
IMAGE] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
NOTICE
Only a image that is save as a LOGO at the [RESIZE] sub menu can be used as the USER IMAGE.
If the USER IMAGE was not saved, no image will be displayed on the LCD monitor at the
time of camera power on. Refer to p.74 for selecting the USER IMAGE.
The USER IMAGE will not be deleted by the [DEL.ALL] or [FORMAT] menu.
MyCAM menu
You can set up a start up image, start up sound and shutter sound.
Every camera working mode has the MyCAM menu.
Start up image
You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
MOVE:
PLAY SETUP MyCAM
CHANGE:
S.IMAGE
S.SOUND
SH.SOUND
IMAGE2
SOUND1
SH.SOUND1
BACK:
PLAY SETUP MyCAM
SET:OK
S.IMAGE
S.SOUND
SH.SOUND
IMAGE 2