Sony RM-NX7000 - Manual (Page 43)

43
Basic Oper
ations
Programming a preset code
1 Press the [SET] key for 2 seconds or longer in the
Home display.
The Set display appears.
2 Press the [PRESET] key.
3 Press a Component key you
want to program a preset
code for.
The programming method selection
display appears.
Note
You cannot select a component being set up or certain keys depending on data set
to the keys though they are shown.
Keys that are not selectable appear pressed. If you press one of these keys, a beep
sounds twice.
Continued