Sony RM-NX7000 - Manual (Page 52)

52
Using the Direct Access buttons (DIRECT
ACCESS)
The Direct Access buttons are shortcuts to skip to given displays from the home
display. If you program a Direct Access button to jump to the desired page, the
page will appear by just pressing the Direct Access button. You can also change
the labels (names) of the Direct Access buttons.
The labels and programmed contents for the Direct Access buttons are as
follows in the default settings. The label names are [Button1],
[Button2]...[Button5] in the order from the left.
[Button1]: Jumps to the first page of the TV component.
[Button2]: Jumps to the first page of the SAT component.
[Button3]: Jumps to the first page of the DVD component.
[Button4]: Jumps to the first page of the VCR component.
[Button5]: Jumps to the first page of the RCVR component.
Setting the label of a Direct Access button
The label of a Direct Access button shown in the touch panel display can be
changed. As an example, let’s change [Button1] to [MOTHER] so that it will be a
mother’s own Direct Access button.
1 Press the [SET] key for 2 seconds or longer in the
Home display.
The Set display appears.
2 Press the [DIRECT ACCESS]
key.
The Direct Access display appears.
Direct Access buttons
Labels (names) of Direct Access
buttons